Pipette tips are disposable plastic cones, designed to fit on pipettes, to transfer a precise volume of liquid.
移液头是一次性塑料锥体，安装在移液器上，以转移精确容量的液体。
•Differentsizes : from 10 μL (∅ ~3mm * ~30mm) to 1500 μL (∅ ~10mm * ~100mm)
•Lightweight: Between 0,1g and 1g
•Wall thickness in general 0.3mm
•尺寸：从10μL（∅~3mm*~30mm）到1500μL（∅~10mm*~100mm）
•重量：0.1g至1g之间
•壁厚一般为0.3mm
Machine technology related/机器技术相关
01
Typical mould sizes (200µl tip)
16cav – IntElect2 S 100 – cycle times 4s+
32cav – IntElect2 S 130 – cycle times 4s+
64cav – IntElect2 S 180 – cycle time 4s+
128cav – El-Exis SP 300 – cycle time 4s+
Injection unit depending on pipette tip design.
Average screw size 45mm with L/D 20 (200µl & 64cav.).
典型模具尺寸(200µl 尖头)
16腔 – IntElect2 S 100 – 循环时间 4s+
32腔 – IntElect2 S 130 – 循环时间 4s+
64腔 – IntElect2 S 180 – 循环时间 4s+
128腔 – El-Exis SP 300 – 循环时间 4s+
注射单元取决于移液头的设计。
平均螺杆尺寸 45mm，长径比 20 (200µl & 64cav.)。
02
Direct drive technology
•Stroke normally low (0.3 to 1D)
•Fast acceleration à Fast injection à No stress to the material •Low runout tolerance in all cavities
•Fast cycle time
直驱技术
•行程通常较短 (0.3 to 1D)
•快速加速＞快速注射＞ 材料无应力
•所有型腔的公差跳动小
•快速循环时间
03
Energy consumption [kW/h]
Typical application for 64cav.tips :
•180t, SC 40mm
•Shot weight 16g
•Cycle 5 sec
能耗 [kW/h]
64腔移液头的典型应用:
•180t, SC 40mm
•注射重量16克
•周期 5s
IntElect 2 is also up to 80% more efficient than hydraulic machines for pipette tips !/IntElect 2生产移液头的效率比液压机高出 80%！
04
Machine layout/机器布局
Our advantages-Services and Comzzpetences/我们的优势——服务与能力
Risk reduction for our customers
为客户降低风险
•Selection of partners to support complex applications (Production cells)
•Setup of Traceability Matrix / Change log
•Ergocheck (Calibration of the machine)
•Extended support during FAT/SAT with GMP trained personnel
•选择合作伙伴以支持复杂的应用（生产单元）
•建立可追溯性矩阵/更改日志
•Ergocheck（机器校准）
•在 FAT/SAT 期间由经过 GMP 培训的人员提供扩展支持
